16 13 015 Removing and installing/replacing tank leak diagnosis module (petrol/gasoline cars with US DMTL version)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove carbon canister
Release screws (1).
Disconnect tank leak diagnosis module (2) from carbon canister in direction of arrow.
Installation:
Tightening torque 16 13 2AZ, see 16 13 TANK VENTILATION
Replace sealing ring.