17 22 Oil Cooler Pipes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
OIL COOLER PIPES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 5AZ Cap nut on transmission oil cooler (on radiator) and on transmission | All | M18 x 1.5 | 20 Nm | |
| 5HP30 | M22 x 1.5 | 28 Nm | ||
| 6AZ Oil lines on transmission | ||||
| Hollow bolt | All | M16 x 1.5 | 37 Nm | |
| 7AZ Oil lines on transmission oil cooler | A 5 S 300 J | 28 Nm | ||
| Hollow bolt | All | M14 x 1.5 | 27 Nm | |
| 8AZ Screw-in fitting on transmission | All | M14x1.5 und M16x1.5 | 37 Nm | |
| 9AZ Oil hose on oil pipe | E23 | 28 Nm | ||
| 10AZ Oil pipe bracket on radiator | E23 | 2 Nm | ||
| 11AZ Oil pipe bracket on body | E23 | 6.5 Nm | ||
| 12AZ Oil cooler on transmission | 5HP30 | 10 Nm | ||
| 13AZ Transmission oil cooler line to transmission | N42 | M8 | 21 Nm |