13 11 Carburetor
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
CARBURETOR - TIGHTENING TORQUE SPECIFICATION
| Type | thread | tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Carburetor to intake manifold | M10 / M20 / M30 | 10 Nm | ||
| 2AZ Carburetor to insulating flange | M10 / M20 / M30 | 10 Nm | ||
| 3AZ Insulating flange to intake manifold | M10 / M20 / M30 | 10 Nm | ||
| 4AZ Idling shut off valve; max. | M10 / M20 / M30 | 5 Nm | ||
| 5AZ Flow valve; max. | M10 / M20 / M30 | 28 Nm | ||
| 6AZ Throttle valve assembly to float housing; max. | M10 / M20 / M30 | 9 Nm | ||
| 8AZ Throttle valve control to carburetor; max. | 2BE | 3 Nm | ||
| 9AZ Warm-up regulator to engine | M10 / M20 / M30 | 23 Nm |