11 24 Connecting Rods and Bearings
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTING RODS AND BEARINGS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Connecting rod bolts | M10 / M30 | Replace, wash and oil screws | 55 Nm | |
| M20 / M21 / M40 / M41 / M42 / M43 / M43TU / M44 / M47 / M47TU / M50 / M51 / M52 / M52TU / M54 / M56 / M57 / M57TU / S52 / S50 US / M70 / S70 / M73 / N40 / N42 / N45 / N46 / N62 / N73 / N62S / N62TU | Replace, wash and oil screws | |||
| Application torque | 5 Nm | |||
| Jointing torque | 20 Nm | |||
| Torque angle | 70 ° | |||
| M60 / M62 | Replace, wash and oil screws | |||
| Application torque | 5 Nm | |||
| Jointing torque | 20 Nm | |||
| Torque angle | 80 ° | |||
| M67 | Replace screws, do not wash off screw coating | |||
| Application torque | 5 Nm | |||
| Jointing torque | 20 Nm | |||
| Torque angle | 85 ° |