11 12 Cylinder Head with Cover N62TU
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD AND CYLINDER HEAD COVER N62TU - TECHNICAL DATA SPECIFICATION
| Cylinder head height: Original dimension | mm | 133.0 ± 0.07 |
| Machining limit | mm | 132.7 ± 0.07 |
| Valve guides are not available as replacement parts. | ||
| Inside diameter of installed valve guide | ||
| Standard | mm | 6.0 +0.12 |
| Tilt clearance, maximum (wear between valve and valve guide) |
mm | 0.8 |
| Bearing of camshaft | ||
| Guide bearing (width) | mm | 14.035...13.993 |