24 4 220 Extractor

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Note: For removing primary bearing on drive shaft.

Transmission: GACVT16Z

SI number: 1 09 05 (188)

Order number: 24 4 220

Extractor

Fig 1: Identifying Extractor (24 4 220)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 24 4 221 Basic body

2 = 24 4 222 Claws (2 x)

3 = 24 4 223 Thrust piece

4 = 24 4 224 Ring