23 2 060 Rillex ball bearing extractor 6306

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M5, 2010 BMW 550i, 2009 BMW M5, 2009 BMW 550i, and 2008 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Note: For removing deep groove ball bearing of input and output shaft

Transmission: 242/4, 262/4

Order number: 23 2 060 Rillex ball bearing extractor 6306

Consisting of:

1 = 23 2 061 Claw for Rillex 6306 (8)

2 = 23 2 062 Union sleeve

3 = 23 2 063 Pressure spindle

Fig 1: Identifying Rillex Ball Bearing Extractor 6306 (23 2 060)

Courtesy of BMW OF NORTH AMERICA, INC.