21 2 140 Clutch centering mandrel (2 x)

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For centering clutch disc on flywheel while installing self-adjusting clutch (SAC) - Phase-in of SAC in E46, 09/97

Transmission: S5D 200G, S5D 250G, S5D 260Z, S5D 310Z, S6S 420G, S6S 560G

Storage location: B4

SI number: 1 13 96 (104)

Order number: 21 2 140

Clutch centering mandrel (2 x)

Fig 1: Identifying Clutch Centering Mandrel (2 X) (21 2 140)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 21 2 141 Clutch centering tool

NOTE: With M10 screw - Transmission: S6S 420G, S6S 560G

2 = 21 2 142 Clutch centering tool

NOTE: With M10 screw - Transmission: S5D 200G, S5D 250G, S5D 260Z, S5D 310Z