72 11 041 Removing and installing/replacing front left or right lower belt fitting (seat belt tensioner)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2009 BMW 550i, 2008 BMW M5, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove SEAT

WARNING: Read and comply with SAFETY REGULATIONS for handling airbag modules and pyrotechnical belt tensioners.
Improper handling can lead to triggering of the pyrotechnical seat belt tensioner or side airbag, resulting in injuries.

Switch off ignition!

Release screw (1).

Tightening torque: see 6AZ in 72 11 SEAT BELTS .

Disconnect plug connection (2) and plug connection of lead (3).

Remove lower strap (belt tensioner) (4).

Fig 1: Identifying Strap (Belt Tensioner), Plug Connection, Screw And Lead

Courtesy of BMW OF NORTH AMERICA, INC.