67 32 610 Replacing fan for backrest on front seat (comfort seat)
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove both rear panels on front seat backrest. See REAR PANEL (NORMAL / ELECTRIC SEAT) or REAR PANEL (COMFORT SEAT) .
Lay felt (1) slightly to one side and disconnect plug connection (2). If necessary, cut through cable tie.
Installation:
Ensure correct cable routing.
If necessary, raise load-area net in working area.
Feed fan for backrest (3) in direction of arrow out of cushion section and remove.