LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls - On-Vehicle Adjustments) >> Idle Speed & Mixture >> Idle Mixture & Co Level

Idle Mixture & Co Level

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1999 BMW Z3, 1999 BMW M3, 1999 BMW M Roadster, 1999 BMW M Coupe, and 1999 BMW 740iL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect oxygen sensor connector. Remove bolt from exhaust manifold and install CO Test Connector (13-0-090) with Adapter (13-0-100) on exhaust manifold. Connect CO meter and check idle mixture. Ensure CO level is within specification. See IDLE SPEED & CO LEVEL  table.
  2. If CO level exceeds specification, check fuel injectors, fuel pressure and coolant temperature sensor. If CO level is less than specification, check idle speed control hoses and connections and check for air leaks. Reconnect oxygen sensor.
scientia non olet · About LEMON Manuals