52 16 095 Removing and installing/replacing thigh support holder on front left or right seat (sports/electric)

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Move thigh support forwards fully

Unfasten plug connection (1) and disconnect.

Release screws (2).

Installation:

Insert screws (2) with Loctite.

Fig 1: Identifying Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Detach seat cover (1) in marked area from carrier (2) for thigh support.

Feed plug out of carrier (2) for thigh support.

Remove carrier (2) for thigh support.

Fig 2: Identifying Seat Cover Marked Area From Carrier

Courtesy of BMW OF NORTH AMERICA, INC.