LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1992 (Body Equipment - Repair) >> Rear Door Locks Handles, Fittings >> 51 22 300 Removing and installing/replacing window cavity cover strip on rear door on left or right

51 22 300 Removing and installing/replacing window cavity cover strip on rear door on left or right

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: If reusing the existing window cavity cover strip (1), make sure it is not bent.

Lever out window cavity cover strip (1) with special tool 00 9 324 (starting at B-pillar).

Fig 1: Removing Window Cavity Cover Strip
G05503789Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Seal (1) must be correctly fitted in cover strip (2).

Fig 2: Identifying Seal And Cover Strip
G04760997Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals