51 16 400 Removing and installing/replacing roller sun blind on fixed side window of left or right rear door

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Retract roller sun blind (1).

Open side window.

Unclip holder (2) on roller sun blind (1) in direction of arrow.

Installation:

Holder (2) must not be damaged.

Fig 1: Unclipping Holder On Roller Sun Blind

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Snap roller sun blind into retaining clip (1).

Retaining clip (1) must not be damaged.

Fig 2: Identifying Retaining Clip

Courtesy of BMW OF NORTH AMERICA, INC.