51 16 400 Removing and installing/replacing roller sun blind on fixed side window of left or right rear door (Security)

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Release screw (1).

Fig 1: Identifying Roller Sun Blind Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Remove roller sun blind (1) in direction of arrow.

Fig 2: Removing Roller Sun Blind

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Glue plastic trim (1) to roller blind housing (2) with Sika activator, Sika primer 206 G+P and window adhesive.

Fig 3: Identifying Plastic Trim And Roller Blind Housing

Courtesy of BMW OF NORTH AMERICA, INC.