51 16 045 Removing and installing/replacing retaining ring on left or right door mirror

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove HOUSING ON DOOR MIRROR
Remove DRIVE FOR ELECTRICALLY ADJUSTABLE DOOR MIRROR

NOTE: Version with door mirror light:
Disconnect plug connection (1).

Release screws (2) and remove complete retaining ring on door mirror (3) from carrier (4).

Installation:

Version with door mirror light:

Ensure correct cable routing.

Fig 1: Removing Retaining Ring On Door Mirror From Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip retaining ring on door mirror (1) with special tool 64 1 020 all round and remove from retaining plate (2).

Fig 2: Unclipping Retaining Ring On Door Mirror With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.