51 45 310 Removing and installing (replacing) center instrument panel trim

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove DECORATIVE STRIP ON INSTRUMENT PANEL ON RIGHT

Release screws (1).

Unclip trim (3) from retainers (3) with special tool 00 9 317 .

Disconnect associated plug connections and remove trim (4).

Fig 1: Identifying Trim And Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remove CONTROL PANEL FOR HEATER - A/C SYSTEM .