51 11 181 Removing and installing/replacing finisher rod on trim grille for front bumper trim
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Release catches (1 and 2) from left to right.
Release catches (1) with special tool 00 9 322 from outside.
Release catches (2).
Remove finisher rod (3).
Installation:
Catches (1 and 2) must not be damaged.