51 47 305 Removing and installing/replacing stowage net in front footwell

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Build date up to 08/2005:

Detach stowage net (1) from holder (2) and remove.

If necessary, replace faulty holders (2).

Fig 1: Identifying Stowage Net And Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Build date from 09/2005:

Snap out stowage net (1) with special tool 00 9 317 in direction of arrow and remove.

Installation:

Position stowage net (1) by means of insert retainers and press into place until it can be heard to engage.

Fig 2: Identifying Stowage Net

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace all insert retainers (1).

Fig 3: Identifying Retainers

Courtesy of BMW OF NORTH AMERICA, INC.