52 26 030 Removing and installing/replacing armrest for rear seat backrest (through-loading system)
WARNING: This page is about a different car, the 2010 BMW 535xi, 2009 BMW 535xi, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Fold down right backrest.
Feed out top cover (1) or detach from armrest (2).
Release screw (3).
Tightening torque: 52 26 4AZ .
Feed armrest first forwards and then to right out of left backrest mount (4).
IMPORTANT:
Cover must not be trapped during installation.