51 49 022 Removing and installing/replacing side (inner) panel for rear lid

WARNING: This page is about a different car, the 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

Necessary preliminary tasks:

Remove TOP PANEL FOR REAR LID

Unclip trim (1) with special tool 00 9 317 from retainers (2) and remove in direction of arrow.

Installation:

If necessary, detach clips (2) from trim (1) and insert in rear lid.

If necessary, replace faulty clips (2).

Fig 1: Removing Trim With Special Tool 00 9 317 From Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) on trim (2) must not be damaged.

Fig 2: Identifying Guides On Trim

Courtesy of BMW OF NORTH AMERICA, INC.