51 49 003 Removing and installing/replacing trim for rear window frame on left or right

WARNING: This page is about a different car, the 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM FOR REAR WINDOW FRAME AT TOP .

NOTE: The operation is described on the left side; proceed in the same way for the right side.

Unclip covers (1).

Fig 1: Identifying Covers

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Fig 2: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release mucket (1).

Release screw (2), unclip cover (3) and remove in direction of arrow.

Installation:

If necessary, detach clips (4) from trim (3) and insert in rear lid.

If necessary, replace faulty clips (4).

Fig 3: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) on trim (2) must not be damaged.

Fig 4: Identifying Guides On Trim

Courtesy of BMW OF NORTH AMERICA, INC.