51 43 150 Removing and installing or replacing trim for left or right door pillar (bottom)
WARNING: This page is about a different car, the 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
Necessary preliminary tasks:
- Remove FRONT ENTRANCE COVER STRIP .
Partially detach mucket in area of B-pillar trim.
Insert special tool 00 9 341 under rear entrance cover strip (inside).
Unclip trim for door pillar (2) by pulling inwards (1), then pull downwards to remove.
Installation:
Following parts of trim for door pillar (1) must not be damaged or missing:
- 2 Clips
- 3 Hooks
- 4 Guides