51 41 019 Removing and installing/replacing door handle on front left or right door trim panel (up to 03/2007)
WARNING: This page is about a different car, the 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove FRONT DOOR TRIM PANEL
Unscrew nuts (1).
Tightening torque 51 41 5AZ .
Unscrew nuts (2).
Lever inside handle (1)
- out of upper screw fastening points
- and pull off upwards from door trim panel (2)
Installation:
Screws (1) and fixtures of inside handle (2) must not be damaged.
Replacement:
Feed inside handle (1) in direction of arrow out of decorative strip (2) and remove.
Installation:
Catches (1) on decorative strip (2) must not be damaged.