51 34 425 Removing and installing/replacing trim on window frame of rear door, rear left or right

WARNING: This page is about a different car, the 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Detach RUBBER GUIDE FOR REAR DOOR WINDOW GLASS in area of trim

E61 and E83 only:

Remove OUTER WINDOW CAVITY COVER STRIP

Release screws (1).

Remove trim (2) towards rear.

Fig 1: Removing Trim And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty clips (1).

Fig 2: Identifying Faulty Clips

Courtesy of BMW OF NORTH AMERICA, INC.

E83 and E91 only:

Installation:

Fit rubber guide (1) before screwing trim (2) into place.

Make sure trim (2) is correctly seated on rubber guide (1) (area A) and on window glass (3).

Fig 3: Identifying Rubber Guide And Trim

Courtesy of BMW OF NORTH AMERICA, INC.