51 16 045 Removing and installing/replacing retaining ring on left or right door mirror

WARNING: This page is about a different car, the 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

64 1 020

Necessary preliminary tasks:

Remove HOUSING ON DOOR MIRROR
Remove DRIVE FOR ELECTRICALLY ADJUSTABLE DOOR MIRROR

NOTE: Version with door mirror light:
Disconnect plug connection (1).

Release screws (2) and remove complete retaining ring on door mirror (3) from carrier (4).

Installation:

Version with door mirror light:

Ensure correct cable routing.

Fig 1: Removing Complete Retaining Ring On Door Mirror From Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip retaining ring on door mirror (1) with special tool 64 1 020 all round and remove from retaining plate (2).

Fig 2: Identifying Retaining Ring, Door Mirror With Special Tool (64 1 020)

Courtesy of BMW OF NORTH AMERICA, INC.