51 12 826 Removing and installing/replacing guide for rear bumper

WARNING: This page is about a different car, the 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove REAR BUMPER TRIM

If necessary, feed cable out of guide (2).

Release nuts (1) on guide (2).

Remove guide (2) towards rear.

Tightening torque 51 12 10AZ .

Fig 1: Identifying Nuts And Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Supports (1) and plug guide (2) on guide (3) must not be damaged.

Replacement:

If necessary, remove BUMPER ANTENNA for comfort access system.

Fig 2: Identifying Supports, Plug Guide And Guide

Courtesy of BMW OF NORTH AMERICA, INC.