54 13 050 Replacing seal for slide/tilt sunroof lid at rear
WARNING: This page is about a different car, the 2010 BMW 535xi, 2009 BMW 535xi, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Open glass slide/tilt sunroof
NOTE:
Follow REPAIR INSTRUCTIONS for bonded seals on glass slide/tilt sunroof.
Detach seal (1) from slide/tilt sunroof lid.
Installation:
Clean bonding surface with adhesive remover .
Press seal without stretching (squashing).
IMPORTANT:
Do not touch bonding surface.
Surface temperature ≥20 °C
Incorrect bonding of the seal will result in leakage.