Torque Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW X5, 2005 BMW X5, 2004 BMW X5, 2003 BMW X5, and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Clutch Slave Cylinder-To-Clutch Housing/Transmission Case | 16 (22) | ||
| Center Mount-To-Body | 15 (21) | ||
| Flexible Disk-To-Propeller Shaft & Transmission Output Flange | |||
| M10 8.8 Thread | 35 (48) | ||
| M10 10.9 Thread | 47 (64) | ||
| M12 10.9 Thread | 74 (100) | ||
| Reinforcement Plate-To-Front Axle Support/Engine Carrier | |||
| Stage 1 | 41 (56) | ||
| Stage 2 | Additional 90° | ||
| Stage 3 | Additional 15° | ||
| Transmission-To-Engine | |||
| Hex Screws | |||
| M8 Thread | 18 (25) | ||
| M10 Thread | 36 (49) | ||
| M12 Thread | 55 (74) | ||
| Screw With Torx Head | |||
| M8 Thread | 16 (22) | ||
| M10 Thread | 32 (43) | ||
| M12 Thread | 53 (72) | ||
| Transmission Cross Member-To-Rubber Mounts | 55 (74) | ||
| Transmission Cross Member-To-Body | 30 (41) | ||
| INCH Lbs. (N.m) | |||
| Transmission-To-Engine M6 Thread | 80 (9) | ||