LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1955 (Body - Tightening Torques - E60) >> Rear Lid >> 41 35 Side Panels

41 35 Side Panels

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATION (SIDE PANELS)

  Type Thread Measure
1AZ Front side panel to body E63 / E64 M6 x 22 10.9 12 Nm
  E83 ST6.3 x 14 7 Nm
  E60 / E61 / E81 / E82 / E85 / E86 / E87 / E88 / E90 / E91 / E92 / E93 M6 7.6 Nm
2AZ Front side panel to body E63 / E64 M6 nut 5 Nm
  E60 / E61 M6 nut 7.6 Nm
3AZ Front side panel to body E60 / E61 Sheet metal screw
ST4.8 x 19
7.6 Nm
4AZ Combination holder, side panel, front, to body E81 / E82 / E87 / E88 / E92 M6 7.6 Nm
5AZ Side panel, rear, to body E85 / E86 M6 7.6 Nm
6AZ Side panel, front, to module carrier/bumper carrier E70 / E71 M6 x 16 8 Nm
7AZ Front side panel to body Area, A-pillar E70 / E71 M6 x 16 6 Nm
8AZ Front side panel to body Area, sill E70 / E71 Sheet metal screw ST4.8 x 19 2.5 Nm
9AZ Front side panel to body Area, cowl panel E70 / E71 M5 x 20 2.5 Nm
10AZ Module carrier, top, to support carrier E70 / E71 M6 x 26 8 Nm
11AZ Module carrier, bottom, to engine carrier E70 / E71 M6 nut 8 Nm