21 21 Clutch Disc and Drive Plate
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
CLUTCH DISC AND DRIVE PLATE - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Work instruction | Measure | |
|---|---|---|---|---|
| 1AZ Clutch to flywheel | E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 8.8 | Replace screws | 25 Nm |
| E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 10.9 | Replace screws | 34 Nm | |
| Clutch to flywheel With ZNS bolts |
Replace ZNS bolts Jointing torque and angle of rotation must be observed without fail | |||
| S85 / S65 | Jointing torque | 15 Nm | ||
| Torque angle | 25° | |||
| N52, N53, N52K M47T2, N45T, N54, N46T, N43, N45K, N47, M57T2, N47S, N62TU | M8 10.9 | Jointing torque | 15 Nm | |
| Torque angle | 90° ± 5° |