11 21 Crankshaft and Bearings

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

CRANKSHAFT AND BEARINGS - TIGHTENING TORQUES SPECIFICATION

	Type	Thread	Tightening specification	Measure
1AZ Increment wheel on crankshaft	S54	M5 10.9	Replace screws
			Jointing torque	5.0 Nm
			Torque angle	45°
Increment wheel on crankshaft		M5 10.9	Replace screws	13 Nm
Increment wheel on crankshaft		M5 8.8	Replace screws	5.5 Nm

CRANKSHAFT AND BEARINGS - TIGHTENING TORQUES SPECIFICATION

	Type	Thread	Tightening specification	Measure
1AZ Torsion damper (hub) to crankshaft (central bolt 12.9)	N54	M16 x 80	Replace screws Lightly oil screws and threads
			Jointing torque	100 Nm
			Torque angle	360°