7.1 Measuring options
WARNING: This page is about a different car, the 2009 MINI Cooper and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
An overview of all measuring options and values (VA = front axle, HA = rear axle) is shown below.
WHEEL ALIGNMENT MEASURING OPTIONS
| Measuring options | Measuring accuracy | In measuring range | Total measuring range |
|---|---|---|---|
| Total wheel toe (VA + HA) | ± 2' | ± 2° | ± 18° |
| Single wheel toe (VA + HA) | ± 2' | ± 2° | ± 9° |
| Camber (VA + HA) | ± 1' | ± 3° | ± 10° |
| Wheel displacement (VA) | ± 2' | ± 2° | ± 9° |
| Geometrical drive axis | ± 2' | ± 2° | ± 9° |
| Castor | ± 4' | ± 18° | ± 22° |
| Kingpin inclination | ± 4' | ± 18° | ± 22° |
| Toe-differential angle | ± 4' | ± 20° | ± 20° |
| Maximum steering angle (VA) | ± 4' | ± 60° | ± 300° |
| Maximum steering angle (HA) | ± 4' | ± 9° | ± 9° |
| Castor correction range | ± 4' | ± 7° | ± 10° |
NOTE:
The measuring accuracy details only apply when using the precision rotating and sliding plates as well as the BMW quick-acting clamps.