3.5 Remote display
WARNING: This page is about a different car, the 2009 MINI Cooper and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
A cableless remote display can be supplied on request. The remote control keys are only active during measuring and adjustment (not for customer data input, or if selecting a vehicle or editing the setpoint data etc.). The following displays are supported by the remote control:
- Measured value with setpoint / actual comparison and tolerance bar
- Steering graphics for steering routines
- Live overview of the track / camber values with a setpoint / actual comparison
- Rim run-out compensation