LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1924 (Alignment & Tire Pressure Warning - Service Information - Clubman) >> 11. Updating the software / setpoint data >> 11.2 Procedure (Beissbarth)

11.2 Procedure (Beissbarth)

WARNING: This page is about a different car, the 2009 MINI Cooper and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
  1. Go to the "Administration" screen
  2. Select the KDS button 
  3. Select Beissbarth 
  4. Insert "Diskette 1"  on request and confirm with "OK"  (program diskette 1 of 2 is created, label it)
  5. Insert "Diskette 2"  on request and confirm with "OK"  (program diskette 2 of 2 is created, label it)
  6. Insert "Diskette 3"  on request and confirm with "OK"  (setpoint data diskette 1 of 3 is created, label it)
  7. Insert "Diskette 4"  on request and confirm with "OK"  (setpoint data diskette 2 of 3 is created, label it)
  8. Insert "Diskette 5"  on request and confirm with "OK"  (setpoint data diskette 3 of 3 is created, label it)
  9. Perform update and/or setpoint data on the KDS in the usual manner with the diskettes which have just been created.
scientia non olet · About LEMON Manuals