51 22 235 Removing and installing/replacing Bowden cable for inside door opener on left or right rear door
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear door trim panel. See REMOVING AND INSTALLING REAR LEFT OR RIGHT DOOR TRIM PANEL (LONG VERSION OR FROM 03/2007) or REMOVING AND INSTALLING REAR LEFT OR RIGHT DOOR TRIM PANEL (UP TO 03/2007) .
Unhook Bowden cable for release lever:
- Tighten release lever (1).
- Lever out lock (2).
- Detach Bowden cable (3) towards rear/top.
Installation:
For fitting, press release lever (1) fully onto door trim panel.