51 16 045 Removing and installing/replacing retaining ring on left or right door mirror

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

64 1 020

Necessary preliminary tasks:

Remove HOUSING ON DOOR MIRROR
Remove DRIVE FOR ELECTRICALLY ADJUSTABLE DOOR MIRROR

NOTE:

Version with door mirror light:

Disconnect plug connection (1).

Release screws (2) and remove complete retaining ring on door mirror (3) from carrier (4).

Installation:

Version with door mirror light:

Ensure correct cable routing.

Fig 1: Removing Complete Retaining Ring On Door Mirror From Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip retaining ring on door mirror (1) with special tool 64 1 020 all round and remove from retaining plate (2).

Fig 2: Unclipping Retaining Ring On Door Mirror With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.