35 31 000 Removing and installing / replacing clutch pedal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove pedal trim. . See REMOVING AND INSTALLING/REPLACING PANEL FOR PEDALS
Remove CAS control unit . See REMOVING AND INSTALLING (REPLACING) CONTROL UNIT FOR CAR ACCESS SYSTEM

Check function after completing tasks.

Disconnect return spring (1).

Unclip fastener (2).

Pull out pin (3).

If necessary, disconnect over-center helper spring.

Fig 1: Identifying Return Spring, Fastener And Pin

Courtesy of BMW OF NORTH AMERICA, INC.

Press hook (1) together and pull out pin.

Installation:

Replace pin.

Remove clutch pedal.

Fig 2: Identifying Hook

Courtesy of BMW OF NORTH AMERICA, INC.