51 43 150 Removing and installing or replacing trim for left or right door pillar (bottom)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 341 . See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Necessary preliminary tasks:

Remove front entrance cover strip.

Partially detach mucket in area of B-pillar trim.

Insert special tool 00 9 341 under rear entrance cover strip (inside).

Unclip trim for door pillar (2) by pulling inwards (1), then pull downwards to remove.

Fig 1: Removing Trim For Door Pillar

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of trim for door pillar (1) must not be damaged or missing:

2 Clips
3 Hooks
4 Guides

Fig 2: Identifying Clips, Hooks And Guides
Courtesy of BMW OF NORTH AMERICA, INC.