51 42 081 Replacing armrest on rear left or right door trim panel (long version or from 03/2007)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear door trim panel
- Remove toggle switch . See 61 31 116 REPLACING ROCKER SWITCH FOR SIDE WINDOW OPERATION (REAR, LONG VERSION OR FROM 03/2007) .
- Remove door handle
IMPORTANT:
Only drill down to door trim panel area so as not to damage the contact surface.
Armrest is only welded to door trim panel during initial fitting; if necessary, release nuts in place of welding spots.
Armrest is only welded to door trim panel during initial fitting; if necessary, release nuts in place of welding spots.
Drill out welding spots (1) on door trim panel (2) with 8 mm dia. welding spot drill bit.
Remove armrest.
Installation:
Secure armrest with nuts (3).