51 12 050 Removing and installing/replacing carrier for rear bumper trim
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear bumper trim
Release nuts (1) on left/right.
Tightening torque 51 12 2AZ . See 12 REAR BUMPER .
Remove carrier (2) straight towards rear.