51 16 360 Removing and installing/replacing right glovebox

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Open glovebox.

Unclip pin (1) from retaining strap (2).

Fig 1: Uncliping Pin From Retaining Strap

G05477603

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip pin (1) from shock absorber (2).

Fig 2: Uncliping Pin From Shock Absorber

G05477604

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Close glovebox (3) and secure against falling out.

Release screws (1) and remove counter-support (2).

Open glovebox (3) and remove.

Fig 3: Identifying Screws And Counter-Support

G05477605

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure counter-support (1) is correctly seated on chamfered faces of shaft (2).

If necessary, turn shaft (2) accordingly.

Fig 4: Turning Shaft

G05477606

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remove lock for right glovebox.