51 16 263 Removing and installing upper rear console trim (long version)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 340 . See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Insert special tool 00 9 340 between trim (1) and upper/side rear console.

Unclip trim (1) towards rear from retainers (2) and feed out.

Fig 1: Uncliping Trim Towards Rear From Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) must not be missing or damaged.

Fig 2: Identifying Clips

Courtesy of BMW OF NORTH AMERICA, INC.