51 16 045 Removing and installing/replacing retaining ring on left or right door mirror

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

64 1 020 . See HEATING AND AIR CONDITIONING - SPECIAL TOOLS .

Necessary preliminary tasks:

Remove housing on door mirror .
Remove drive for electrically adjustable door mirror . See 67 13 001 REPLACING DRIVE UNIT FOR ELECTRICALLY OPERATED LEFT OR RIGHT DOOR MIRROR .

NOTE: Version with door mirror light:
Disconnect plug connection (1).

Release screws (2) and remove complete retaining ring on door mirror (3) from carrier (4).

Installation:

Version with door mirror light:

Ensure correct cable routing.

Fig 1: Removing Complete Retaining Ring On Door Mirror From Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip retaining ring on door mirror (1) with special tool 64 1 020 all round and remove from retaining plate (2).

Fig 2: Uncliping Retaining Ring On Door Mirror With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.