51 16 026 Replacing mirror glass

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317 . See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

WARNING: Risk of injury!
Move mirror glass with hand carefully and slowly. If mirror glass is damaged:
Wear protective goggles and cut-proof gloves.
Risk of injury by flaking-off glass splinters.

IMPORTANT: Risk of damage!
Bring door mirror to room temperature to prevent catches from breaking off.

IMPORTANT: Risk of damage!
Secure mirror glass (1) against falling out.

Press mirror glass (1) on side vehicle by hand to full extent.

Unclip mirror glass (1) from outer side with special tool 00 9 317 all round.

Unlock and disconnect associated plug connections, remove mirror glass (1).

Fig 1: Pressing Mirror Glass On Side Vehicle

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) must not be damaged.

Fit mirror glass (2) with retaining lugs (1) flush on mirror adjusting drive and clip into place.

Ensure correct locking.

Make sure mirror adjusting drive functions correctly.

Fig 2: Identifying Retaining Lugs And Mirror Glass

Courtesy of BMW OF NORTH AMERICA, INC.