51 16 000 Removing and installing/replacing mirror on left or right front door

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Partially lever out cover on inner door window frame in area at front.

Disconnect plug connection (1).

Unlock plug connections (2) and disconnect from control unit (3).

Fig 1: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Press cover (1) to one side.

Press rubber grommet (2) outwards.

Release screws (3) and feed out mirror (4) with cable.

Installation:

Tightening torque 51 16 1AZ. See 16 MIRRORS, COVERS, ASHTRAY .

Fig 2: Feed Out Mirror With Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Due to the thread-tapping screws, the tightening torque of the new mirror is increased by 2 Nm.

Tightening torque 51 16 1AZ. See 16 MIRRORS, COVERS, ASHTRAY .

Installation:

Following parts of mirror must not be damaged or missing:

Seal on mirror base plate
Sound insulation in front door

Carry out function check.