51 11 181 Removing and installing/replacing finisher rod on trim grille for front bumper trim
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 322 . See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .
NOTE:
Release catches (1 and 2) from left to right.
Release catches (1) with special tool 00 9 322 from outside.
Release catches (2).
Remove finisher rod (3).
Installation:
Catches (1 and 2) must not be damaged.