51 47 491 Removing and installing/replacing rear underbody protection
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front underbody protection
Not M5
Unfasten screws (1... 3).
Press heat shield (5) back.
Release screws (4) and remove underbody protection (6).
Installation:
Ensure correct seating.
Center underbody protection (6) and tighten down all screws.