35 31 000 Removing and installing or replacing clutch pedal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove pedal trim . See 51 45 185 REMOVING AND INSTALLING/REPLACING PANEL FOR PEDALS .
Remove CONTROL UNIT FOR CAR ACCESS SYSTEM

Disconnect return spring (1).

Unclip fastener (2).

Pull out pin (3).

If necessary, disconnect over-center helper spring.

Fig 1: Identifying Return Spring, Fastener And Pin

Courtesy of BMW OF NORTH AMERICA, INC.

Press hook (1) together and pull out pin.

Installation:

Replace pin.

Remove clutch pedal.

Fig 2: Identifying Hook And Pin

Courtesy of BMW OF NORTH AMERICA, INC.