23 11 608 Replacing guide tube for clutch release unit (GS6-17BG/DG)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove transmission
Remove clutch controller and release lever from guide tube.

Release screws.

Remove guide tube.

Tightening torque: 23 11 2AZ . See MANUAL TRANSMISSION - TIGHTENING TORQUES .

Fig 1: Locating Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace screws.

Clean new guide tube.

Guide surface must be clean (no labels/stickers or residual adhesive, etc.).